Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Soundproofing Panel of a BMW 3 Series Roof

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Checks and maintenance

How do you remove the soundproofing panel of a BMW 3 Series roof? Let's see in this video how to proceed. Start by removing the side handles of the headliner with a screwdriver, then remove the sun visors and the overhead lights located in the panel. If the vehicle has a sunroof, you must open it before removing the panel. Once everything is removed, detach the headliner panel around the perimeter of the roof. As soon as the panel is free from clips, you can pull it out of the vehicle. Be careful when pulling it out of the car as it may break.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Ceiling Panel on BMW 3 Series
How to Remove the Ceiling Panel on BMW 3 Series
BMW Serie 3 (1990-2001 / E36) How do you remove the panel from the BMW 3? Let's go through the disassembly of all the necessary parts for removing the roof panel. Remove the faste…
How to Remove Spark Plugs on a BMW 3 Series
How to Remove Spark Plugs on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Do you want to remove the spark plugs on a BMW 3 Series? Pull the hood release lever and lift the hood, securing it. The coils are located under the …
How to Remove the Interior Roof Lining of the BMW 3 Series
How to Remove the Interior Roof Lining of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) In this brief guide, learn how to remove the roof lining or headliner of the BMW 3 Series by following these simple steps. First, get inside the vehi…

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer
    • Serie 3 2005-2013 - Why is the on-board computer of the BMW 3 Series slow to start up? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos