Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Crankshaft Pulley on BMW 1 Series E81

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years 2004-2013

In this video tutorial, you will find instructions on how to remove the crankshaft pulley on a BMW 1 Series E81. Before you can carry out the work, you need to remove the front bumper. To remove the crankshaft pulley, first, remove the serpentine belt by loosening the tensioner; then, unscrew the six bolts of the pulley while holding the central bolt with a 22 mm spanner, as shown in the video. Finally, remove the pulley and replace it with the new one, reassembling everything!

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port located in the BMW 1 Series E81?
Where is the OBD port located in the BMW 1 Series E81?
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) If you own a BMW 1 Series e81 and want to find out where the car's OBD port is located, all you have to do is follow the procedure described in our n…
Replacement of the timing chain of the BMW 1 Series.
Replacement of the timing chain of the BMW 1 Series.
BMW Serie 1 (2011-2019 / MK 2, F20, F21) The instructions provided in this guide will allow us to disassemble and replace the timing chain of the BMW 1 Series with N13 engine. First, we open…
Localization of battery, diagnostic port, and fuse boxes of the BMW 1 Series E81.
Localization of battery, diagnostic port, and fuse boxes of the BMW 1 Series E81.
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) In this video we can see where some important components of the BMW X1 E81 are located: the battery is located in the luggage compartment, under the …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos