Do it yourself
| ||||
|
BMW Serie 1 - Video tutorial
Model: BMW Serie 1
E87, E82, E81, MK 1
- Years 2004-2013 In this guide, let's see the main instructions that will allow us to disassemble the entire dashboard and central instrumentation of the BMW 1 Series. First of all, we get on board the car and start disassembling the side plastic pillars; then we remove the airbag and the steering wheel, and then remove the switches too, as shown in the video. At this point we use a plastic lever to remove the central cover of the dashboard, unscrewing all the screws that we find underneath; let's disassemble the car radio and the climate control controls to remove the entire dashboard, following the video tutorial until the end!
Posted on 10 April 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |