Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Display from a BMW 1 Series?

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years 2004-2013
Part: Onboard computer

In this video tutorial, you can see how to remove the central display from a BMW 1 Series. For this operation, you will need a suitable tool for removing inserts, a T20 Torx key, a cross-head screwdriver, and a flat-head screwdriver. First, remove the dashboard plate, the air conditioning control module, and the radio frame. For the latter, you need to extract it by first removing the 4 fixing screws and then disconnecting the rear metal connector. In the upper area of the dashboard, remove the air vents and finally unscrew the fixing screws of the display.

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Dashboard of a BMW 1 Series?
How to Remove the Dashboard of a BMW 1 Series?
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) To remove the dashboard of a BMW 1 Series, use a tool like a screwdriver to pry off the trim that runs along the entire dashboard. Once this trim is …
How to reset the tire warning light on the 2021 BMW Series 1.
How to reset the tire warning light on the 2021 BMW Series 1.
BMW Serie 1 (2019-2026 / MK 3, F40) To manually reset the tire warning light on your BMW Series 1 (2021 model), simply follow the procedure outlined in this new guide. First, make sure …
How do you reset the Service light on the BMW 1 Series?
How do you reset the Service light on the BMW 1 Series?
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) The Service indicator of the BMW 1 Series can be reset by turning on the instrument panel and letting all error messages disappear from the display. …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos