Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuses on BMW 1 Series

Model: BMW Serie 1 MK 2, F20, F21 - Years 2011-2019
Part: Fuse box

How do you replace the operating fuses on a BMW 1 Series? Let's see how to replace the parts. Open the car door, pull up the engine compartment release lever located at the bottom left of the dashboard, and lift the bonnet, securing it. Using a screwdriver, unscrew the securing screws of the container located on the left side of the front compartment, detach the cover, and remove it from the fuse box. Once the box is exposed, replace the damaged fuses with new ones. Additional fuses can be found in the boot, where the car battery is located.

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located on a 2011 BMW 1 Series?
Where is the fuse box located on a 2011 BMW 1 Series?
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) The 2011 BMW 1 Series does not have a fuse box in the engine compartment. This is because all the fuses for this model are contained within a single …
Where Are the Fuses Located in a BMW 1 Series?
Where Are the Fuses Located in a BMW 1 Series?
BMW Serie 1 (2011-2019 / MK 2, F20, F21) In the BMW 1 Series, all fuses are contained within dedicated fuse boxes installed in the vehicle: in this car model, you can find two fuse boxes. Th…
Where Are the Fuses in the BMW 1 Series?
Where Are the Fuses in the BMW 1 Series?
BMW Serie 1 (2011-2019 / MK 2, F20, F21) Each of the designated fuse boxes installed in the BMW 1 Series contains the fuses that regulate the operation of the electronic devices installed in…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos