Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Outer Door Handle of a BMW 3 Series

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Handle

Before you begin, open the door of your BMW 3 Series. Start by prying off and removing the side cover of the Torx screw that secures the handle. Next, unscrew and remove the securing screw itself. Once done, pry off and remove the small section of the handle. Then, unclip the hook that secures the larger section. At this point, pry off and remove the larger section. Once you complete this step, you will have successfully disassembled the handle.

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Handle of the BMW 3
How to Remove the Handle of the BMW 3
BMW Serie 3 (1998-2006 / E46) Remove the outer door handle of the BMW? Let's take off the handle from the 3 Series. Move the plastic cover at the top of the door, then unscrew the…
How to Remove the Exterior Handle of a BMW 3 Series
How to Remove the Exterior Handle of a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Learn how to remove and install the exterior handle located on the door of a BMW 3 Series. Remove the screws on the side of the door (side panel) usi…
How to Remove the Exterior Door Handle of a BMW 3 Series
How to Remove the Exterior Door Handle of a BMW 3 Series
BMW Serie 3 (1990-2001 / E36) Before you begin, open the front door of your BMW 3 Series. Start by prying off and removing the side cover that protects the screw securing the exte…

    Frequently Asked Questions

    • Serie 3 2005-2013 - Why is the door handle of the BMW E90 locked? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos