Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Seat from BMW 1 Series F20

Model: BMW Serie 1 MK 2, F20, F21 - Years 2011-2019
Part: Seat

In this video tutorial, you will see the main steps on how to remove the front seat from a BMW 1 Series F20. First, open the rear hatch and lift the floor panel; then disconnect the battery terminals. At this point, open the door and start disconnecting the electrical connectors located under the seat by pressing the levers; then unscrew the fixing screws found in the seat tracks using a Torx key. Finally, remove the seatbelt fixing bolt and take out the seat, as shown in the video!

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port located on the BMW 1 Series F20?
Where is the OBD port located on the BMW 1 Series F20?
BMW Serie 1 (2011-2019 / MK 2, F20, F21) If you own a BMW 1 Series f20 and want to find out where the OBD port is located so you can connect any compatible diagnostic tool, all you have to d…
How to replace the headlight bulb of the BMW 1 Series F20
How to replace the headlight bulb of the BMW 1 Series F20
BMW Serie 1 (2011-2019 / MK 2, F20, F21) If you want to find out how you can replace the headlight bulb of your BMW 1 Series F20, just pay attention to the procedure described below. First, …
Guide to Removing the Engine on the BMW 1 Series F20 M135i
Guide to Removing the Engine on the BMW 1 Series F20 M135i
BMW Serie 1 (2011-2019 / MK 2, F20, F21) In this video tutorial, you will find the main instructions for removing the engine from the BMW 1 Series F20, in the M135i version. First, open the …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos