Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Heater Fan Motor on BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Blower motor

See other generations:
Video tutorial

Want to remove the fan motor on a 3 Series? Open the front hood and see the disassembly of the parts. Disconnect the battery terminals.

Use a lever to remove the plastic under the dashboard, and unscrew the screws of the cover (where the fan motor is located) with a screwdriver. Disconnect the large connector of the resistor, then unscrew the fan mounting screws.

Insert a new fan motor (connect the power connector). Finally, reinstall the cover and tighten the screws.

Reconnect the battery terminals.


Updated on 20 April 2026 by ScegliAuto


Related tutorials

How to Remove the Cabin Fan from a BMW 3 Series
How to Remove the Cabin Fan from a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Before you start, open the hood of your BMW 3 Series. Begin by removing the rear cover near the windshield wipers and the upper engine cover by unscr…
How do you remove the fan from the heating system in the BMW 3 Series e90?
How do you remove the fan from the heating system in the BMW 3 Series e90?
BMW Serie 3 (2005-2013 / E92, E90, E91) The classic way to realize that the fan of the heating system of your car is not working is shown in the video available here, in fact, by activating…
How to Replace the Cabin Heater Radiator in a BMW 3 Series
How to Replace the Cabin Heater Radiator in a BMW 3 Series
BMW Serie 3 (1990-2001 / E36) Below are the instructions to remove and replace the cabin heater radiator in a BMW 3 Series. First, open the hood of your car and start disconnectin…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos