Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Dipped Beam Bulb on BMW 1 Series

Model: BMW Serie 1 F21, MK 2, F20 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

With the handbrake engaged and the engine off, unscrew the round cover located behind the affected headlamp, facing upwards. At this point, you can press the side tabs of the connector and extract it from its housing.

Now, to remove the bulb from the connector, simply pull it out by hand. Proceed in reverse order for inserting and mounting the new bulb.

Once finished, check that the new bulb is functioning. The video also shows how to replace the fog light bulb.

Goodbye!


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How to Replace the Dipped Beam Bulbs in the BMW 1 Series?
How to Replace the Dipped Beam Bulbs in the BMW 1 Series?
BMW Serie 1 (2011-2019 / F21, MK 2, F20) Replacing the dipped beam bulbs in the BMW 1 Series, as shown in this tutorial, is an extremely simple and quick task. First, ensure that the key is …
Replacing the front headlight bulb on a BMW 1 Series
Replacing the front headlight bulb on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) This guide shows how to remove and replace the front headlight bulb on a first series BMW 1 Series, following these simple steps. First, open and lif…
Replacing the Headlight Bulb on a BMW 1 Series
Replacing the Headlight Bulb on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Today's guide will show you the steps to remove and replace the dipped beam bulb of the front headlight on a BMW 1 Series. First, open the bonnet of …

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos