Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulbs in the BMW 1 Series?

Model: BMW Serie 1 MK 2, F20, F21 - Years 2011-2019
Part: Headlight bulb

Replacing the dipped beam bulbs in the BMW 1 Series, as shown in this tutorial, is an extremely simple and quick task. First, ensure that the key is not in the ignition for safety. Then, go to the wheel arch on the side you will be working on and, using a flat-head screwdriver, open the cover located at the front of it. Next, unscrew the large circular cap, turn the bulb counter-clockwise, and remove it from the headlamp. At this point, simply connect the replacement bulb and follow the reverse procedure.

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Headlight Bulb on a BMW 1 Series
Replacing the Headlight Bulb on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Today's guide will show you the steps to remove and replace the dipped beam bulb of the front headlight on a BMW 1 Series. First, open the bonnet of …
How to activate the position lights of the BMW 1 Series
How to activate the position lights of the BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Today's guide will show us the main steps that will allow us to activate all the position lights and other bulbs of the BMW 1 Series. First, we get o…
How to Open and Replace the Bulbs in BMW 1 Headlights
How to Open and Replace the Bulbs in BMW 1 Headlights
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Replace the damaged bulbs in the rear lights on the BMW 1 Series? Let's see how to replace the bulbs. Open the boot lid, then remove the cover on the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos