Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : Replacing the front engine mount on the BMW 3 Series E90

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Engine mount
Operation: Replacing the front engine mount on the BMW 3 Series E90

In this video tutorial we will see how to remove and replace the front engine mount on the BMW 3 Series E90, following the instructions below. First of all we open the bonnet of our car and we go to loosen the fixing nut of our engine support, which we find on the upper part of the engine compartment; then we lift the car and remove the lower engine protection by unscrewing the screws. At this point we unscrew the fixing nuts of the support and we go to keep the engine raised with a jack; extract and replace the motor support, following the video to the end!


Posted on 27 February 2024 by ScegliAuto

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos