Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Mount on the BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Engine mount

See other generations:
Video tutorial

Today's main steps will show you how to remove and replace the engine mount on the BMW 3 Series, following the instructions below. First, open the hood and start securing your jack to hold the engine up; then raise the vehicle and unscrew the bolts of the engine mount to remove it, as illustrated in the video.

At this point, proceed with the inspection or replacement of the entire engine mount, as well as with the original one; secure it properly and gently release the jack from the engine, following the video tutorial to the end!


Updated on 29 October 2026 by ScegliAuto


Related tutorials

Engine Mount Replacement on BMW 3 Series F30 (N20-N26)
Engine Mount Replacement on BMW 3 Series F30 (N20-N26)
BMW Serie 3 (2012-2019 / F31, F30) In this video, discover the steps to remove and replace the engine mount on the BMW 3 Series F30, with N20 or N26 engine. First, lift the vehicle and…
Replacing the Front Engine Mount on the BMW 3 Series E90
Replacing the Front Engine Mount on the BMW 3 Series E90
BMW Serie 3 (2005-2013 / E92, E90, E91) In this video tutorial, you will learn how to remove and replace the front engine mount on the BMW 3 Series E90, following the instructions below. Fi…
How to know the fuse diagram of a BMW 3 Series
How to know the fuse diagram of a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) The fuse box of a BMW 3 Series car can be located inside the vehicle's cabin and contains fuses related to: windshield wiper motor, windshield washer…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos