Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : Replacement of the engine mount on the BMW 3 Series F30 (N20-N26)

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 F31, F30 - Years 2012-2019
Part: Engine mount
Operation: Replacement of the engine mount on the BMW 3 Series F30 (N20-N26)

Let's find out in this video the steps that will allow us to disassemble and replace the engine mount on the BMW 3 Series F30, with N20 or N26 engine. First of all, we lift the car and position the jack under the engine, in order to keep it raised after removing the engine support; after which we use a 16 mm socket wrench to unscrew the bolts of the engine support, after having removed the protection panel located under the car, as shown in the video. At this point let's replace it with the new one and reassemble everything, applying the reverse procedure!


Posted on 22 May 2022 by ScegliAuto

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos