Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing Cruise Control

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Accessory kit

See other generations:
Video tutorial

Cruise control is a device that reduces driver fatigue, especially on long highway stretches where speed remains constant for extended periods. Obtain the installation kit. Before proceeding, deactivate the airbag and disconnect the negative terminal of the battery.

The device must be installed in the steering wheel, so start by removing the retaining screws of the airbag module, accessible through the holes on the sides of the steering column using an Allen wrench. Loosen the screws and carefully pull away the airbag cover, disengaging the plastic clips.

Once the airbag is removed, disconnect the two connectors located on the back of it by releasing the small plastic tabs with a tool. Be careful not to drop the airbag module, keep it away from intense heat sources, do not carry it away, do not shake or hit it, as it may explode.

Proceed with the installation by carefully following the instructions included in the kit.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Guide to Installing a Steering Wheel with Cruise Control
Guide to Installing a Steering Wheel with Cruise Control
BMW Serie 3 (1998-2006 / E46) This guide shows you how to replace the steering wheel with one that has cruise control and radio controls. The first thing to do, to avoid problems …
How to know the fuse diagram of a BMW 3 Series
How to know the fuse diagram of a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) The fuse box of a BMW 3 Series car can be located inside the vehicle's cabin and contains fuses related to: windshield wiper motor, windshield washer…
How to find out the fuse diagram of a BMW Series 3
How to find out the fuse diagram of a BMW Series 3
BMW Serie 3 (1998-2006 / E46) The selected video shows the diagrams related to the fuse boxes present in a BMW Series 3 car. The fuse panels are located inside the vehicle's cabin…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos