Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Installing a Steering Wheel with Cruise Control

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Steering wheel

See other generations:
Video tutorial

This guide shows you how to replace the steering wheel with one that has cruise control and radio controls. The first thing to do, to avoid problems with the airbag, is to disconnect the negative battery cable and wait about 15 minutes.

Remove the glove compartment on the driver's side and the cover in the engine compartment as shown in the video. Remove the airbag, disconnect the connector, and unscrew the steering wheel mounting bolt.

Replace the steering wheel, ensuring that the marks align with those on the hub, connect the wires as shown in the video, and proceed with reassembly. Then modify the wiring as illustrated.

The car in the video is a BMW 3 Series (E46), and the procedure shown is only valid for this vehicle.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

Installing Cruise Control
Installing Cruise Control
BMW Serie 3 (1998-2006 / E46) Cruise control is a device that reduces driver fatigue, especially on long highway stretches where speed remains constant for extended periods. Obtai…
How to disassemble and replace the steering wheel of the BMW Series 3
How to disassemble and replace the steering wheel of the BMW Series 3
BMW Serie 3 (2005-2013 / E92, E90, E91) The instructions in this guide will show us how to disassemble and replace the steering wheel and its airbag on the BMW Series 3 in simple steps. Fir…
Installing Steering Wheel Controls for Communication Devices
Installing Steering Wheel Controls for Communication Devices
BMW Serie 3 (1990-2001 / E36) This tutorial shows how to install a Media Bridge connection system that allows steering wheel control of smartphone and USB iPod devices through the…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos