Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Control Arms

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Control arm

The necessary tools are a ratchet wrench, a set of combination wrenches, and the replacement arm. Lift the vehicle and secure it with appropriate jack stands to prevent it from falling. Remove the wheel to access the mechanics. Once the broken control arm is identified, proceed with removal by unscrewing all the bolts. Also, remove the steering arm support by unscrewing the two bolts. Check the rest of the mechanics, especially the vibration dampers that support the arms; replace them if necessary. Reinstall the new control arm and the rest of the previously removed components.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front suspension arm of the BMW 3 Series E92.
Replacement of the front suspension arm of the BMW 3 Series E92.
BMW Serie 3 (2005-2013 / E91, E90, E92) To replace the front suspension arm of the BMW series, lift the car and remove the front wheel, clean the fixing nuts, unscrew the nuts that secure t…
Replacing Front Control Arm Bushings
Replacing Front Control Arm Bushings
BMW Serie 3 (1998-2006 / E46) The video shows how to replace the bushings of the front control arms. First, lift the car slightly with a ramp to access the underside. The procedur…
Rear Shock Absorber Replacement
Rear Shock Absorber Replacement
BMW Serie 3 (2005-2013 / E91, E90, E92) Replacing the rear shock absorbers is definitely simpler than the front ones since the shock and spring are not co-axial; therefore, lift the vehicle…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos