Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Speakers in BMW 3 Series E91

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Speaker

See other generations:
Video tutorial

This guide shows how to replace the rear door speakers in the BMW 3 Series E91. The first step is to remove the trim plastic on the door armrest using a trim removal tool; next, remove the plastic around the handle to expose the screw that needs to be removed.

Unscrew the three Torx screws with a T20 wrench located at the top of the handle, behind it, and in the armrest.

Now you can remove the inner door panel with the help of a trim tool. At this point, disconnect the wires from the panel.

To remove the speaker, unscrew the three 8 mm nuts and disconnect the tweeter wire. The tweeter is held in place by a threaded ring; once this piece is loosened, you can remove the tweeter from the housing.

Install the replacement parts in the same manner as the old parts were removed.


Updated on 24 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Speakers in a BMW 3 Series?
How to Replace the Rear Speakers in a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) To replace the rear speakers in a BMW 3 Series, located near the rear shelf, you need to fully raise the headrests of the rear seats. Once the headre…
Replacing the Speakers in the BMW 3 Series
Replacing the Speakers in the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) This guide will show you how to remove and replace all the speakers in the BMW 3 Series, following the instructions below. First, get inside the vehi…
Where to Find the Fuse Box of the BMW 3 Series E91
Where to Find the Fuse Box of the BMW 3 Series E91
BMW Serie 3 (2005-2013 / E92, E90, E91) In this new mini guide dedicated to your BMW 3 Series E91, discover where the fuse box is located. This way, you can finally address the various elec…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos