Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Handle of a BMW 3 Series?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Handle

To replace the interior door handle of the BMW 3 Series, detach the trim located under the armrest using a lever tool. You will also need to remove the cover of the handle by prying it from the inside and loosening all the screws underneath. Once the screws are loosened, you can remove the panel, as you will need to loosen screws located inside to replace the handle. After removing the screws inside the panel, the old handle can be detached and replaced. The panel with the new handle can then be reinstalled on the door.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Inner Door Handle on a BMW 3 Series
How to Remove the Inner Door Handle on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Before you begin, open the door of your BMW 3 Series. Start by removing and detaching the door panel, prying out and removing the inserts, then unscr…
How to Replace the Interior Handle of the BMW 3 Series?
How to Replace the Interior Handle of the BMW 3 Series?
BMW Serie 3 (2012-2019 / F30, F31) To replace the interior handle of the BMW 3 Series, remove the chrome trim located above the handle. This will allow you to loosen the screws underne…
How to Replace the Interior Handle on a BMW 3 Series
How to Replace the Interior Handle on a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) In today's video, you will learn how to replace the interior handle on the door panel of a BMW 3 Series. This guide also applies to other contemporar…

    Frequently Asked Questions

    • Serie 3 2005-2013 - Why is the door handle of the BMW E90 locked? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos