Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the internal handle of the BMW 3 Series?

Model: BMW Serie 3 F31, F30 - Years 2012-2019
Part: Handle

In order to replace the internal handle of the BMW 3 Series, you need to detach the chrome trim above the handle. This will allow you to loosen the underlying screws and detach the panel from the door. This will provide access to the internal screws of the panel: by loosening the ones that hold the internal handle to the panel, it will be possible to remove it completely and replace it with a new spare part. After the new handle has been installed on the panel, it will be possible to secure the panel by screwing in the appropriate screws and inserting the trim onto the handle.

Posted on 18 November 2021 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the interior door handle on the BMW 3 Series?
How do you replace the interior door handle on the BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) In order to replace the interior handle of the BMW 3 Series, it is necessary to remove the glossy molding that is located along the entire panel and …
How do you replace the interior door handle on the BMW 3 Series?
How do you replace the interior door handle on the BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) To replace the interior door handle of the BMW 3 Series, the molding under the armrest must be removed, using an object that acts as a lever. It will…
How to Replace the Adhesive Cover of the Interior Handle on a BMW 3 Series
How to Replace the Adhesive Cover of the Interior Handle on a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Today, learn how to replace the adhesive cover of the interior handle on a BMW 3 Series yourself. To perform this simple task, get inside the vehicle…

How to Install Universal Roof Bars on a Renault Clio

Install universal roof bars on a Renault Clio. Universal roof bars are used on cars with roof rails (fixed bar secured to the roof of the car) and without. Fit the bar kit (as shown in the video) with the bars adjusted according to the width of the car. Position the brackets at both ends of the doors on the car's original roof rails. Once you have adjusted the width of the anchoring brackets (measure with a tape measure), tighten the bolts with the butterfly nut (if a lock is present) until fully secured to the roof rails. Finally, fit the safety caps on both sides.

Watch the video!


by ScegliAuto

More videos