Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Instrument Cluster Bulbs in a BMW 3 Series?

Model: BMW Serie 3 E36 - Years 1990-2001
Part: Light bulb

To replace the instrument cluster bulbs in a BMW 3 Series, loosen the two screws located at the top of the display. This will allow you to pull the entire unit out of its housing, disconnecting the connector at the back to remove it completely. Once the cluster is removed, you can extract the bulbs from the back and replace them with new ones. After the replacement, reconnect the instrument cluster connector and insert it back into its housing.

Updated on 1 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Instrument Cluster Lights on a BMW 3 Series
How to Replace the Instrument Cluster Lights on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) This brief guide will show you how to disassemble and replace the bulbs in the instrument cluster of the BMW 3 Series, following the instructions bel…
Instrument Cluster Replacement on BMW 3 Series
Instrument Cluster Replacement on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Are the instrument cluster bulbs damaged? Let's see how to remove the instrument cluster. Remove the instrument cluster mounting screws, pry the inst…
How to Remove the Instrument Cluster from a BMW 3 Series
How to Remove the Instrument Cluster from a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) How do you remove the instrument cluster installed in a BMW 3 Series? Follow these steps for proper disassembly: Remove the screws on the sides of th…

    Frequently Asked Questions

    • Serie 3 2005-2013 - What sidelights does the BMW 3 Series mount? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos