Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Maintaining Your Car's Radiator

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Radiator

The radiator is a crucial part of any car's engine because it ensures the proper functioning of the cooling system. It is essential to keep it clean. The first step is to drain it completely by opening the drain valve. Clean the metal fins that allow air to pass through, located in front of and behind the radiator. Replace the hoses coming from the radiator if they are worn, as they may not be able to ensure the proper flow of coolant. After draining all the fluid, rinse the radiator by opening the drain valve to let out the water. Once finished, you can add new coolant, start the vehicle, and bleed the radiator with the cap open.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Coolant
How to Replace the Engine Coolant
BMW Serie 5 (2003-2010 / E60, E61) Maintaining your vehicle is an aspect that should not be overlooked to keep it running efficiently. Among the maintenance tasks, consider replacing t…
How to Replace Your Car's Antifreeze
How to Replace Your Car's Antifreeze
BMW Serie 5 (2003-2010 / E60, E61) With the arrival of winter, your car requires more attention to ensure it performs efficiently throughout the year. One essential task is filling the…
Installing a New Radiator
Installing a New Radiator
BMW Serie 5 (1995-2003 / E39) This video tutorial shows how to install a new radiator on a BMW 5 Series. The video starts with a comparison between the old and new radiator. Since…

Other guides you may be interested in

How to Replace the Brake Pads on a BMW X3

For this operation, you will need to remove the wheel where you will perform the replacement, so it will be convenient to lift your vehicle and place it on jack stands; this way, you will work much more comfortably. To remove the spring that holds the front pads, use a flathead screwdriver. Now, unscrew the bolts that secure the piston to the pads, then remove it, giving you access to both pads that brake the rotor. Of course, repeat the same steps on the other side if the same replacements are needed.

Watch the video!


by ScegliAuto

More videos