Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the windshield wipers on the BMW E90

Model: BMW Serie 3 E92, E90, E91 - Years 2005-2013
Part: Windshield wipers

Wipers are undoubtedly some of the most used components in your car. For this reason they are also very prone to wear and therefore to possible malfunctions or even breakages. If you need to replace the windshield wipers of your BMW E90 but you don't know how to do it, don't worry because you just need to follow the instructions in this guide. First of all, lift the wipers and proceed with the removal of the sheath present in the lower part. Immediately afterwards, unclip the end of the wiper and quickly clean the windshield using a soft cloth. This eliminates any residual dirt present. Finally, attach the new wipers and lower them completely.

Posted on 1 February 2022 by ScegliAuto

Video tutorial

Related tutorials

How do the windshield wipers of the BMW 3 Series E91 version work?
How do the windshield wipers of the BMW 3 Series E91 version work?
BMW Serie 3 (2005-2013 / E92, E90, E91) We can see in this video how the windshield wipers of the BMW 3 Series E91 version work: by touching the windshield wiper once, the classic touch on …
BMW 3 Series windshield replacement
BMW 3 Series windshield replacement
BMW Serie 3 (2005-2013 / E92, E90, E91) Let's see below the instructions necessary to disassemble and replace the windshield of the BMW 3 Series. First of all, we open the bonnet and begin …
Disassembly of BMW 3 Series windshield splashes
Disassembly of BMW 3 Series windshield splashes
BMW Serie 3 (2005-2013 / E92, E90, E91) In this video tutorial we will see how to remove the windshield washer diffusers of a BMW 3 Series E90. First we open and lift the car's engine hood …

Other guides you may be interested in

How to Remove the Cabin Filter from a Nissan Juke

In this video, let’s see how to remove the cabin air filter from a Nissan Juke. Open the glove compartment and unclip the end stop arms. Then, use a screwdriver to remove the securing screws. After completing the previous steps, unscrew the side screws in the glove compartment and remove the plastic cover. Unscrew the screws again, and after disconnecting the power cables, pull the glove compartment away from the dashboard. Then, slide the air filter out of its housing as shown in the video. Insert the new filter and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos