Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Windshield Washer Sprayers BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the windshield washer sprayers from a BMW 3 Series E90. First, open and lift the hood of the car and remove the plastic cover located at the top, next to the wipers; then, unscrew the screws using a socket wrench.

Remove the air filter and disconnect the electrical connector located underneath; then, detach the windshield washer sprayer and pull it out with the entire cable: after that, install the new one. If necessary, perform the same procedure on the other sprayer and replace it.


Updated on 30 March 2026 by ScegliAuto


Related tutorials

Replacement of the windshield washer pump of the BMW 3 Series
Replacement of the windshield washer pump of the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) These short and simple steps will show us how to dismantle and replace the windshield washer pump of the BMW 3 Series. First, lift the vehicle and st…
How to replace the windshield washer fluid reservoir of the BMW 3 Series.
How to replace the windshield washer fluid reservoir of the BMW 3 Series.
BMW Serie 3 (1998-2006 / E46) Today we will see the information that will allow us to disassemble the windshield washer fluid reservoir of the BMW 3 Series, in simple steps. First…
Replacement of the windshield washer pump of the BMW 3 Series 328I
Replacement of the windshield washer pump of the BMW 3 Series 328I
BMW Serie 3 (1998-2006 / E46) The following steps will allow us to disassemble and replace the windshield washer pump of the BMW 3 Series 328I. First, we open the hood of the car …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos