Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the heat exchanger of the BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years 2005-2013
Part: Heater core

In today's video tutorial we will see how to remove and replace the internal heating radiator or the heat exchanger of the BMW 3 Series. First of all we get on board the car and start by removing part of the dashboard; we remove the central plastic cover and the air conditioning controls, and then also remove the multimedia system of the car radio. At this point, once the entire dashboard has been removed, we can remove the heating radiator, disconnecting the liquid pipes (letting it drain into a container; we just have to follow the video tutorial to the end!

Posted on 13 February 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the BMW 3 Series heat exchanger?
How do you replace the BMW 3 Series heat exchanger?
BMW Serie 3 (1982-1992 / E30) In order to replace the BMW 3 Series heat exchanger, you need to access the components located inside the passenger compartment. In particular, it wi…
How to Remove and Replace the Air Temperature Sensor on a BMW 3 Series
How to Remove and Replace the Air Temperature Sensor on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Here’s how to remove and replace the air temperature sensor on a BMW 3 Series: Open the hood, lift it, and secure it with the prop rod. Disconnect th…
How to Remove the Water Pump on a BMW 3 Series
How to Remove the Water Pump on a BMW 3 Series
BMW Serie 3 (1990-2001 / E36) Let's see how to remove the water pump on a BMW 3 Series. Lift the car on a column lift and secure it, then use a screwdriver to unscrew the locking …

Other guides you may be interested in

Removing VW Passat Interior Lights

Below is how to replace the bulbs in all the interior lights of this vehicle. For the lights on the roof, use a flathead screwdriver to gently lever at the side where you will release the retaining clip, pull it out, and after replacing the bulb, press it back into place. For the light above the front seats, lever (with the flathead screwdriver) directly on the transparent plastic to detach it from the retaining tabs (replace the bulbs and press it back into place). For the rear light and number plate lights, perform the same operation: lever to release the tab, replace, and press back into place.

Watch the video!


by ScegliAuto

More videos