Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Air Temperature Sensor on a BMW 3 Series

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: MAF sensor

See other generations:
Video tutorial

Here’s how to remove and replace the air temperature sensor on a BMW 3 Series: Open the hood, lift it, and secure it with the prop rod. Disconnect the sensor's power connector (if necessary, remove the air filter housing). Using a socket wrench, unscrew and remove the mass air flow sensor from its location.

After comparing the damaged valve with the new one, install it onto the air intake hose in the engine compartment. Test the vehicle's proper operation after installing the temperature sensor and all associated parts.


Updated on 5 March 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Temperature Sensor on BMW 3 Series
How to Remove and Replace the Temperature Sensor on BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Let's see how to properly remove and replace the air temperature sensor on a BMW 3 Series. Open the hood, lift it, and secure it with the prop rod; d…
Replacing the Outside Temperature Sensor of the BMW 3 Series
Replacing the Outside Temperature Sensor of the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Here’s how to remove and replace the outside temperature sensor on the BMW 3 Series. First, lift the vehicle and begin removing the lower engine cove…
Replacing Temperature Sensor on BMW 3 Series
Replacing Temperature Sensor on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) How do you remove the temperature sensor on a BMW 3 Series? Raise the hood of the car to locate the temperature sensor and remove it. Remove the engi…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos