Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Temperature Sensor on BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Engine coolant temperature sensor

See other generations:
Video tutorial

Let's see how to properly remove and replace the air temperature sensor on a BMW 3 Series. Open the hood, lift it, and secure it with the prop rod; disconnect the sensor's power connector (if necessary, remove the air filter housing kit). Grasp and remove the valve from its seat.

After comparing the damaged valve with the new one, install it onto the air intake hose in the engine compartment. Test the vehicle's proper operation after installing the temperature sensor and all associated parts.


Updated on 5 March 2026 by ScegliAuto


Related tutorials

How to Replace the Temperature Sensor on a BMW 3 Series
How to Replace the Temperature Sensor on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) This guide will show you how to remove and replace the coolant temperature sensor on a BMW 3 Series. First, open the hood of your car and disconnect …
Replacing Temperature Sensor on BMW 3 Series
Replacing Temperature Sensor on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) How do you remove the temperature sensor on a BMW 3 Series? Raise the hood of the car to locate the temperature sensor and remove it. Remove the engi…
How to Remove and Replace the Air Temperature Sensor on a BMW 3 Series
How to Remove and Replace the Air Temperature Sensor on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Here’s how to remove and replace the air temperature sensor on a BMW 3 Series: Open the hood, lift it, and secure it with the prop rod. Disconnect th…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos