Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the BMW F Series key

Model: BMW BMW Various
Part: Key

Replacing the button battery inside the key of your BMW F Series is a rather simple operation, but if you are having difficulty, just follow the instructions in this guide. First you have to completely remove the physical emergency key. Once this is done, using a small flat screwdriver, open the plastic cover. Immediately below you finally have access to the old pile. You just have to replace it with a perfectly compatible new one and, finally, reassemble the cover correctly without forgetting to insert the physical key inside.

Posted on 28 February 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the Bmw remote control battery
How to replace the Bmw remote control battery
BMW BMW Various In this video we see how to replace the dead battery of the remote control of various Bmw models; for example it is supplied in the Series 1, Series …
How to replace the remote control key battery on BMW
How to replace the remote control key battery on BMW
BMW BMW Various If we want to replace the key battery on BMW models of the 1,3, 5 series, and also of the X series, in the description below we will find the informa…
How to replace the key battery on BMW F series
How to replace the key battery on BMW F series
BMW BMW Various After purchasing a 3 volt button battery cod. CR2450 we press the button located on the back of the case in order to completely extract the metal key…

Other guides you may be interested in

How to Remove the Fuel Pump from a Hyundai IX35

How to remove the fuel pump from a Hyundai IX35. First, disconnect the battery cables, then remove the rear seat from the car. You will find various wiring and a metal piece with screws; that is what you need to dismantle. Undo the screws of the metal cap and remove it. Wrap the entire perimeter of the metal sheet with absorbent paper or cloth, then, with a screwdriver, undo the large bolt around the pump (if present for the model). Disconnect the power connectors and the liquid circulation pipes. Finally, extract the floating fuel pump. To perform the assembly, work in reverse order.

Watch the video!


by ScegliAuto

More videos