Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Chain on the BMW 1 Series

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Timing belt

See other generations:
Video tutorial

To replace the timing chain on the BMW 1 Series, you will need to remove the entire engine; this involves taking off the front bumper. Once removed, proceed to disassemble the various parts as shown in the video, disconnecting the connectors and other components that protect the timing system.

After this, you can take out the timing chain and replace it with a new unit. Unfortunately, this engine is prone to issues in this area, so it is very likely that during the vehicle's life, you will need to carry out this operation, probably before reaching 93,000 miles.


Updated on 11 May 2026 by ScegliAuto


Related tutorials

Replacing the Timing Chain on the BMW 1 Series 118i
Replacing the Timing Chain on the BMW 1 Series 118i
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Below are the main instructions for removing and replacing the timing chain on the BMW 1 Series 118i. First, open the bonnet of your car and start by…
How to Replace the Timing Chain on a BMW 1 Series
How to Replace the Timing Chain on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) To replace the timing chain on a BMW 1 Series, open the bonnet to access the front of the engine block: this car has a longitudinal engine, so the ti…
How to Recognise the Noise of the Timing Chain on a BMW 1 Series 120D N47
How to Recognise the Noise of the Timing Chain on a BMW 1 Series 120D N47
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) In this short video, you will understand how and when to notice the noise of the timing chain on the first generation BMW 1 Series, particularly on t…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos