Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Car Radio

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Car stereo

To remove the original car radio, first remove the climate control knobs by prying them off sideways with a plastic tool or a small screwdriver, possibly wrapped at the tip with electrical tape. Then, unscrew the mounting screws of the car radio and pull it out of its slot by disconnecting the connectors attached to the back (the largest one has a bayonet lock).
Before disconnecting the connectors, it is advisable to check if you have the activation code (antitheft code) needed for the subsequent ignition (if you don't have it, you can always retrieve it at the dealership or on some specialized website).

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing the Car Radio
Instructions for Removing the Car Radio
BMW Serie 3 (1998-2006 / E46) To remove the original factory car radio, first, you need to take off the climate control knobs. Using a plastic lever or a small flathead screwdrive…
Instructions for Removing the Car Radio
Instructions for Removing the Car Radio
BMW Serie 3 (1998-2006 / E46) First, consider that some components of the car radio and navigation system (CD changer, DVD map reader) are located in the trunk, on the side: if yo…
Removing Car Stereo for Repair
Removing Car Stereo for Repair
BMW Serie 3 (2005-2013 / E91, E90, E92) Remove the plastic trim, then unscrew the mounting screws of the stereo to allow for extraction. Disconnect the various connectors and remove the ste…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos