Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery Problem Diagnostics

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Onboard computer

This video shows how to check for potential issues related to the battery warning light on a BMW 5 Series. These operations are performed using the onboard computer. First, check that the vehicle's voltage is correct: press the button on the onboard computer for about ten seconds until the word "test" appears, then continue pressing the button until the number 19 is displayed. The ON/OFF indicator will continue to blink alternately, so press the button to lock the display on OFF. Next, set the TEST display to number 9. This will allow you to verify the vehicle's voltage. When you turn off the car's ignition, the voltage number will appear on the display (in this case, 124). Once you have verified the voltage, check if the issue is related to an intrinsic problem with the battery.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to recharge the battery of a BMW key
How to recharge the battery of a BMW key
BMW Serie 5 (2003-2010 / E60, E61) If you have problems with your car key or notice a warning on the on-board computer, you most likely need to recharge the key's battery. No direct in…
How to remove the "service engine soon" light on the BMW 5 Series.
How to remove the "service engine soon" light on the BMW 5 Series.
BMW Serie 5 (2003-2010 / E60, E61) To remove the "Service Engine Soon" light in the BMW 5 Series, follow these steps: Turn on the car and wait for the "Service Engine Soon" light to il…
Issues That Could Cause the Car Key to Malfunction
Issues That Could Cause the Car Key to Malfunction
BMW Serie 5 (1995-2003 / E39) It may happen that the key for our car does not work. In this case, the reasons can be multiple and related to the key itself, the ignition switch, o…

Other guides you may be interested in

How to Remove the Brake Disc on Mitsubishi Pajero

How to remove the brake disc along with the brake pads on a Mitsubishi Pajero? First, lift the vehicle on a column lift to a suitable height for working. Next, remove the wheel (using a telescopic spanner or air drill) with the respective bolts. Undo the locking bolt of the brake caliper, and remove it from the caliper support. Remove the caliper support from the wheel hub using a socket spanner. Once the brake disc is free, undo the screws with a fixed spanner and detach the disc from the wheel hub. Disconnect the various wiring and brake fluid pipes from the wheel assembly. Replace them with new parts (always use original and compliant parts). Prepare to install the new disc along with the respective pads, brake caliper, caliper support, etc.

Watch the video!


by ScegliAuto

More videos