Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you glue the ceiling of the BWM Series 3?

Model: BMW Serie 3 E36 - Years 1990-2001
Part: Checks and maintenance

In order to glue the roof of the car you must first of all remove it from inside the passenger compartment, removing the plastic covers of the uprights. Once the roof has been extracted, the old fabric cover must be completely unstuck before the new one can be installed. Therefore, removing the spongy part, you will have to scrape off all the old glue, so that you can insert a new one. After the new glue has been correctly spread, the new sponge and the new fabric will have to be inserted over it, so that the headliner can be fixed again inside the passenger compartment.

Posted on 25 March 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the sky in the BMW 3 Series E92?
How to replace the sky in the BMW 3 Series E92?
BMW Serie 3 (2005-2013 / E92, E90, E91) The headliner of our BMW 3 Series E92 has come unstuck and we want to do the DIY to replace it without spending the labor money in the workshop? No p…
Disassembly of the interior lights ceiling on the BMW 3 Series E90
Disassembly of the interior lights ceiling on the BMW 3 Series E90
BMW Serie 3 (2005-2013 / E92, E90, E91) In this video tutorial we will see the steps on how to disassemble and replace the interior ceiling light of the passenger compartment, together with…
How to replace the front headlight's ceiling light of the BMW 3 Series.
BMW Serie 3 (2005-2013 / E92, E90, E91) Today's guide will show us how to disassemble and replace the headlight's ceiling light of the BMW 3 Series, following these simple steps. First, we …

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer

How to Replace the Key Battery on a Dacia Sandero

How do you replace the key battery on a Dacia Sandero? Let's see in this video how to perform the replacement correctly. Take your ignition key and unscrew the tiny screw on it. Use a screwdriver to pry between the two plastic parts until they separate; remove the dead battery with a screwdriver and take a new one of the same size and voltage. Reassemble the two parts of the key fob cover until you hear the click of the lock (tighten with the screw). Check the proper functioning of the key fob by testing the buttons for locking and unlocking the doors.

Watch the video!


by ScegliAuto

More videos