Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Brake Wear Light on a BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Warning light – error code

See other generations:
Video tutorial

This guide shows how to reset the brake wear light on a BMW 3 Series by following the instructions below. First, get inside the vehicle and turn on the ignition; then scroll using the knob on the left stalk until you reach the brake light option displayed on the instrument cluster, as shown in the video.

At this point, press and hold the button located on the instrument cluster to perform the reset; then turn off the ignition and start the engine, checking that the light has been reset!


Updated on 17 May 2026 by ScegliAuto


Related tutorials

How do you reset the brake wear indicator on a BMW Series 3?
How do you reset the brake wear indicator on a BMW Series 3?
BMW Serie 3 (2005-2013 / E92, E90, E91) It will be possible to completely make the brake wear warning light of the BMW Series 3 disappear by turning on the instrument panel and pressing the…
How to Reset the Brake Wear Light on a BMW 3 Series?
How to Reset the Brake Wear Light on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) On the BMW 3 Series, you can reset the brake wear light by turning on the ignition using the button located to the right of the steering wheel: this …
How to Reset the Brake Wear Light on a BMW 3 Series?
How to Reset the Brake Wear Light on a BMW 3 Series?
BMW Serie 3 (2012-2019 / F31, F30) To reset the brake wear light on a BMW 3 Series, first replace the brake pads. Then, insert the ignition key into the ignition switch and turn it on.…

    Frequently Asked Questions

    • Serie 3 2012-2019 - What does the BMW 3 Series F30 blue battery light mean? Read answer
    • Serie 3 2005-2013 - What does the check engine light mean on the BMW 3 Series E90? Read answer

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos