Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Oil Level Sensor

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Engine oil

In this video tutorial, replace the engine oil level sensor on a BMW 5 Series. First, ensure that the oil pan is completely drained. It is also important that the operation is performed with the engine completely cold. Once you remove the old sensor by loosening the mounting bolts with a 10 mm wrench, disconnect the wiring. Then, install a new sensor, securing it again with the small 10 mm bolts. Reconnect the sensor. Only at this point can you refill the pan with new engine oil.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Oxygen Sensor
How to Replace the Oxygen Sensor
BMW Serie 5 (1995-2003 / E39) One of the components of the onboard system is the oxygen sensor. If the sensor fails, the check engine light turns on and stays on until the sensor …
Replacing the Crankshaft Position Sensor
Replacing the Crankshaft Position Sensor
BMW Serie 5 (1995-2003 / E39) Locate the position of the sensor on the engine block. The sensor is connected to the control unit via a cable that must be disconnected from the sen…
How to top up the brake fluid of the BMW 5 Series.
How to top up the brake fluid of the BMW 5 Series.
BMW Serie 5 (2003-2010 / E60, E61) Today's guide will show us the steps that will allow us to check the brake oil level and possibly top up the BMW 5 Series. First of all, let's open t…

Other guides you may be interested in

How to Dismantle the Drum Brake on a Fiat Punto

In this video, learn how to change the drum brake and associated shoes on a Fiat Punto. First, lift the car on a column jack to the desired height, then remove the wheel (using a socket spanner or air drill) with the respective pins. Unscrew the securing pins of the drum cover with a socket spanner and remove it from the wheel hub support. Dismantle the bearing from the hub using a socket spanner. Once you have unscrewed the central pin, extract the worn shoes and fit the new ones. Prepare to install the new brake kit, proceeding in reverse through the operations.

Watch the video!


by ScegliAuto

More videos