Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Crankshaft Pulley on BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013

See other generations:
Video tutorial

In today's video tutorial, see how to remove and replace the crankshaft pulley on the BMW 3 Series by following these simple and quick steps. First, open the hood of your car and start removing the front bumper by unscrewing all the mounting screws and disconnecting the various electrical connectors; then loosen the tensioner to remove the alternator belt, as shown in the video.

At this point, unscrew the mounting screws of the crankshaft pulley to remove it and replace it with the new one, applying the reverse procedure!


Updated on 23 May 2026 by ScegliAuto


Related tutorials

How to Remove the Engine Pulley from a BMW 3 Series
How to Remove the Engine Pulley from a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) In this detailed video, see how to remove the engine pulley from a BMW 3 Series. Gather a socket wrench with the appropriate sockets or a cordless im…
How to Replace the Crankshaft Pulley on a BMW 3 Series?
How to Replace the Crankshaft Pulley on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) To replace the crankshaft pulley on a BMW 3 Series, open the hood to access the components at the front of the engine block. For easier access, it ma…
How to Remove the Crankshaft Seal on the BMW 3 Series
How to Remove the Crankshaft Seal on the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Today's tutorial will show you how to remove and replace the crankshaft seal on the BMW 3 Series, following the instructions below. First, open the h…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos