Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Engine Pulley from a BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013

In this detailed video, see how to remove the engine pulley from a BMW 3 Series. Gather a socket wrench with the appropriate sockets or a cordless impact wrench with bits. Mark the exact position of the installed pulley with a marker (for reinstallation). Use the socket wrench to loosen the pulley retaining bolts (if the pulley rotates, lock the central bolt with another socket wrench), remove the tensioner (as shown in the video) using a Torx bit, and pull off the belt. Finally, remove the pulley retaining bolts and detach the pulley from the central bolt.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (2005-2013 / E91, E90, E92) In today's video tutorial, see how to remove and replace the crankshaft pulley on the BMW 3 Series by following these simple and quick steps. First, …
BMW Serie 3 (2005-2013 / E91, E90, E92) Today's tutorial will show you how to remove and replace the crankshaft seal on the BMW 3 Series, following the instructions below. First, open the h…
BMW Serie 3 (2012-2019 / F30, F31) To replace the timing chain on a BMW 3 Series, open the hood to access the bolts securing the valve cover at the top of the engine block. You will al…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos