Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Exterior Light Selector on a BMW 1 Series?

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, you will see how to remove the exterior light selector on a BMW 1 Series, a straightforward task if you need to replace the knob or the entire unit. First, unscrew the single screw located at the bottom of the side panel of the dashboard, then unclip it using a plastic spatula.

Once done, detach the selector from the relevant clips, pull it out, and disconnect the rear connector. At this point, you can proceed with replacing the damaged unit and reassemble everything by following the reverse procedure.


Updated on 26 May 2026 by ScegliAuto


Related tutorials

How to Activate the Position Lights on the BMW 1 Series
How to Activate the Position Lights on the BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) This guide will show you the main steps to activate all the position lights and other bulbs on the BMW 1 Series. First, get inside the vehicle and tu…
How to Remove the Interior Light Fitting of the BMW 1 Series
How to Remove the Interior Light Fitting of the BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Today's guide illustrates the steps to remove and replace the interior light fitting and its bulbs of the BMW 1 Series. First, get into the vehicle a…
Replacing the Rear Light Bulbs on a BMW 1 Series
Replacing the Rear Light Bulbs on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) In a few simple steps, you will discover how to remove and replace the rear light bulbs on a BMW 1 Series. First, open the boot lid and start by remo…

    Frequently Asked Questions

    • Serie 1 2011-2019 - What is the cost for a BMW 1 Series MOT? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos