Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light Bulbs on a BMW 1 Series

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tail light bulb

See other generations:
Video tutorial

In a few simple steps, you will discover how to remove and replace the rear light bulbs on a BMW 1 Series. First, open the boot lid and start by removing the side cover; then unscrew the internal screws of the light using a key, extracting the light from the outside after disconnecting the electrical connector, as shown in the video.

At this point, disconnect the electrical connector of the bulbs, accessing the light housing; replace any faulty bulbs with new ones, reassemble the light unit, and check the operation of the brake lights!


Posted on 11 June 2026 by ScegliAuto


Related tutorials

Replacing Front Headlamp Bulb on BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Replace the blown bulbs mounted in the front headlamp of a BMW 1 Series. Open and lift the front headlamp, securing it in place. Access the front hea…
How to Replace the Rear Headlight Bulbs on a BMW 1 Series
BMW Serie 1 (2011-2019 / F21, MK 2, F20) How to replace the rear headlight bulbs on a BMW 1 Series? Open the boot, unscrew the fastening screws located at the side of the headlight (right) w…
How to Replace the Rear Light Bulb on a BMW 1 Series
How to Replace the Rear Light Bulb on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Are the rear light bulbs blown? Let's see how to disassemble them on a BMW 1 Series. Open the boot lid and secure it. Remove the cover of the rear li…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos