Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a BMW X1

Model: BMW X1 F48 - Years 2015-2022
Part: Service warning light

If you notice a strange light on the dashboard when you start your car, don't worry because it can be resolved in a couple of minutes without the costly intervention of an expert. Insert the key and turn on the ignition. Immediately locate the thin button below the speedometer. Press and hold it for a few seconds, then release it. Using the arrows on the left steering column, navigate through the menu until you find the icon of a car with an S above it. At this point, press the "BC" button located at the end of the left lever and manually change the date. Confirm and turn off the ignition. The reset is complete.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a 2020 BMW X1?
How to Reset the Service Light on a 2020 BMW X1?
BMW X1 (2015-2022 / F48) Resetting the service light on a 2020 BMW X1 should not be a problem. To demonstrate this, we have included the video attached. You must perform the …
How to Reset the Service Light on a BMW X1?
How to Reset the Service Light on a BMW X1?
BMW X1 (2009-2015 / E84) To reset the Service light on a BMW X1, turn on the ignition by inserting the key and pressing the appropriate button next to the steering column. On…
How to Reset the Service Light on a 2015 BMW X1
How to Reset the Service Light on a 2015 BMW X1
BMW X1 (2015-2022 / F48) Resetting the service light on a 2015 BMW X1 model F48 involves a few simple steps that should be performed after completing the maintenance service.…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos