Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Valve Cover Gasket Replacement

Model: BMW Serie 5 E34 - Years 1988-1995
Part: Engine

Before installing the new valve cover gasket, thoroughly clean the mating surfaces on both the cylinder head and the cover to remove any dirt and buildup that could affect adhesion and sealing. Once cleaning is complete, insert the side grommets, pushing them fully into their respective seats. Position the new gasket, aligning it with the dowel pins, and then place the cover, tightening the fastening nuts with a torque wrench. In this case, it is not necessary to apply gasket sealant.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Valve Seal Modification
Valve Seal Modification
BMW Serie 5 (1995-2003 / E39) This guide shows how to replace the valve seal. To do this, remove all the wires and intake hoses from the upper valve cover. Then, take off the old …
Valve Cover Gasket Replacement
Valve Cover Gasket Replacement
BMW Serie 5 (1995-2003 / E39) This video shows how to replace the valve cover gaskets. First, with the engine cold, remove the engine cover plastics by unscrewing the support nuts…
Valve Guide Seal Replacement
Valve Guide Seal Replacement
BMW Serie 5 (1988-1995 / E34) When replacing the head gasket, it is good practice to also replace the valve guide seals: use the appropriate arch clamp to compress the return spri…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos