Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dashboard Removal

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Dashboard

See other generations:
Video tutorial

The dashboard of a car houses various components and instrumentation, including all main and auxiliary controls. This guide shows how to remove the dashboard.

Remove the hex screws located on the sides of the dashboard at the bottom, near the air vents. Two additional screws are located at the bottom and should also be removed.

Once the 4 screws are removed, proceed to extract the dashboard, keeping in mind that there are clips, so be cautious to avoid breaking the plastic clips and electrical wires.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Seats on a BMW 5 Series
How to Remove the Rear Seats on a BMW 5 Series
BMW Serie 5 (1995-2003 / E39) Let's see how to remove the rear seats mounted on a BMW 5 Series: Remove the metal guides located at both ends of the backrest (mounted on the car's …
How to Change Your Car's Cabin Air Filter
How to Change Your Car's Cabin Air Filter
BMW Serie 5 (2003-2010 / E60, E61) Changing your car's cabin air filter is very important because it protects you from external agents that enter the cabin. Replace the filter regularl…
Remove Chrome Trim from Your Car
Remove Chrome Trim from Your Car
BMW Serie 5 (1995-2003 / E39) This guide shows how to remove chrome trim from your car. Start by locating a corner to begin the removal. Carefully loosen it and use a flathead scr…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos