Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the "Inactive Self-Leveling Suspension" Error on the BMW 5 Series?

Model: BMW Serie 5 E60, E61 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Warning light – error code

See other generations:
Video tutorial

To remove the "Inactive Self-Leveling Suspension" error on the BMW 5 Series, connect a diagnostic tool to the vehicle's OBD port, located at the lower left of the steering column. Once connected, follow the instructions shown in the video to reset the error in the control unit.

Sometimes, it may also be necessary to replace the compressor that prevents the suspension from functioning correctly. After resetting the error, you can disconnect the scanner.


Updated on 9 June 2026 by ScegliAuto


Related tutorials

How to Reset the Airbag Fault on the BMW 5 Series E60
How to Reset the Airbag Fault on the BMW 5 Series E60
BMW Serie 5 (2003-2010 / E60, E61) To clear the airbag error on the BMW 5 Series E60, close all four doors and turn on the ignition to check the warning light, then turn it off. Insert…
How to Replace the Hydraulic Lift Supports of the Trunk Lid on a BMW 5 Series
How to Replace the Hydraulic Lift Supports of the Trunk Lid on a BMW 5 Series
BMW Serie 5 (1995-2003 / E39) Before you start, open the trunk lid of your BMW 5 Series. Begin by releasing the clips that secure the hydraulic lift supports, using a flathead scr…
How to Remove the Rear Seats of the BMW 5 Series
How to Remove the Rear Seats of the BMW 5 Series
BMW Serie 5 (1988-1995 / E34) Today's guide shows you how to remove and replace the rear seats of the BMW 5 Series in simple and quick steps. First, open the rear doors and start …

    Frequently Asked Questions

    • Serie 5 2017-2024 - What does the orange engine warning light mean in the BMW 5 Series G30? Read answer

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos