Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Front Headlight

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Headlight

See other generations:
Video tutorial

To remove the front headlight, first remove the trim along the lower edge between the headlight and the bumper: it is secured with pressure clips, so simply press to release the trim. Next, remove the mounting pins for the headlight, located on both the grille and the bottom of the headlight (use an extension to reach them easily).

Once all the mounting pins are removed, pull the headlight forward and gently disconnect the corresponding connectors attached to the bulb holder.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Front Headlight
Instructions for Removing the Front Headlight
BMW Serie 3 (1998-2006 / E46) To remove the front headlight, first remove the front turn signal: open the hood and locate the hole on the edge of the fender, near the turn signal.…
Replacing the Headlight Lens on a BMW 3 Series
Replacing the Headlight Lens on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Today, we will go over the instructions to remove and replace the plastic lens of the front headlight on a BMW 3 Series. First, open the hood of the …
Remove Front Headlight Bulb on BMW 3
Remove Front Headlight Bulb on BMW 3
BMW Serie 3 (2005-2013 / E92, E90, E91) Remove the front headlight bulb from a BMW 3? Let's go through the process of removing the damaged bulb. Open the hood and lift it. Locate the headli…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos