Do it yourself
Frequently asked questions about cars and motorcycles

Instructions for Removing Door Handle

Model: BMW Serie 3 E30 - Years: 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992
Part: Handle

See other generations:
Video tutorial

To remove the external door handle, you must first remove the door trim panel. Then, unscrew the lock mounting screws since the handle is connected to the lock and must be removed together; detach the plastic cover around the handle, unscrew the lock retaining ring while removing the gasket; pull out the retaining clips connected to the handle mounting pins and also remove the pins; disconnect the connectors, release the safety latch and the opening cable from the internal handle to complete the removal.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

BMW Serie 3 (1998-2006 / E46) To remove the internal opening handle from the door panel, you need to take off the panel itself (you can search for a tutorial video on how to remov…
BMW Serie 3 (1998-2006 / E46) To disassemble the drive shaft, lift the vehicle on a lift and first remove the exhaust pipe. Once the muffler is removed, take off the heat shield t…
BMW Serie 3 (1998-2006 / E46) If you need to remove the exhaust system, it is advisable to let the system cool completely and position the vehicle on car ramps if you do not have …

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos