Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses of the BMW 3 Series located?

Model: BMW Serie 3 E92, E90, E91 - Years 2005-2013
Part: Fuse box

The BMW 3 Series fuses are contained inside the special fuse box which is installed inside the vehicle. In this car model, the fuse box is located inside the glove box on the passenger side. To access it, it will be sufficient to open the glovebox and remove the plastic cover from its rear part. Behind this cover you will find all the fuses, indicated with their identification code and amperage: these fuses include that of the passenger compartment fan, dipped headlights, etc.

Posted on 26 September 2022 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses of the BMW 3 Series located?
Where are the fuses of the BMW 3 Series located?
BMW Serie 3 (2005-2013 / E92, E90, E91) The fuses of the BMW 3 Series are divided inside the special fuse boxes present in the vehicle: in this model there are three boxes containing fuses.…
Where are the fuses located in the BMW 3 Series F30?
Where are the fuses located in the BMW 3 Series F30?
BMW Serie 3 (2012-2019 / F31, F30) In order to locate the fuse box containing all the fuses for your BMW 3 Series F30 (2012-2019), you simply need to pay attention to the following ins…
Where are the fuses of the BMW 3 Series E46 located?
Where are the fuses of the BMW 3 Series E46 located?
BMW Serie 3 (1998-2006 / E46) All the fuses of the BMW 3 Series E46 are located inside the single fuse box that is installed on the vehicle: the latter is located inside the passe…

Other guides you may be interested in

How to Remove the Cabin Fan Resistor on a Mercedes A-Class W169

If the cabin fan speed does not change when adjusted or only activates at maximum speed, the fan resistor may be damaged. Replacing it is fairly easy, and the part is readily available. The resistor is located right behind the center console, but you can access it by removing the trim panel directly below the steering column and then detaching the side cover of the tunnel. At this point, you can easily reach the resistor and its power connector; just pull it out of its housing to replace it.

Watch the video!


by ScegliAuto

More videos