Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to find the fuse diagram on a BMW 1 Series F20

Model: BMW Serie 1 MK 2, F20, F21 - Years 2011-2019
Part: Fuse box

In this very short video tutorial, the location of the fuse box and its diagram on a BMW 1 Series F20, produced from 2011 to 2019, is shown. To access the fuse box on this model, first open the bonnet; the fuse box is located inside the engine compartment, at the top and to the left. To reach it, you must first remove the protective cover situated under the windscreen wipers. Once done, you can remove the fuse box cover and gain full access to the fuses.

Updated on 17 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Where to find the fuses and how to replace them on the BMW 1 Series
Where to find the fuses and how to replace them on the BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Below are the steps to locate the fuse boxes and replace them if necessary on the BMW 1 Series, following the instructions provided. First, get insid…
Where is the OBD port located on the BMW 1 Series F20?
Where is the OBD port located on the BMW 1 Series F20?
BMW Serie 1 (2011-2019 / MK 2, F20, F21) If you own a BMW 1 Series f20 and want to find out where the OBD port is located so you can connect any compatible diagnostic tool, all you have to d…
How to replace the headlight bulb of the BMW 1 Series F20
How to replace the headlight bulb of the BMW 1 Series F20
BMW Serie 1 (2011-2019 / MK 2, F20, F21) If you want to find out how you can replace the headlight bulb of your BMW 1 Series F20, just pay attention to the procedure described below. First, …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos