Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 7
    4. : Dashboard elements disassembly instructions

BMW Serie 7 - Video tutorial

Model: BMW Serie 7 MK 4, E68, E65, E67, E66 - Years 2001-2008
Part: Dashboard
Operation: Dashboard elements disassembly instructions

To be able to disassemble some elements of the dashboard, including the center console, start by removing the side ventilation vent, immediately above the light control knob (pry along the edges using a plastic tool); once the ventilation vent has been removed, unscrew the right screw and the left nut on the inside that secure the dashboard trim frame (in this case with a briar effect finish); At this point it is possible to continue removing the other elements, taking care not to damage the pressure fasteners, where present, and proceeding in order from the most external to the most internal ones.


Posted on 12 August 2023 by ScegliAuto



Instructions for removing the climate control controls
BMW Serie 7 (2001-2008 / MK 4, E68, E65, E67, E66) To be able to disassemble the climate control panel it is necessary to remove some elements of the dashboard: at this stage it is suggested to pay pa
Disassembly of the front air vents
BMW Serie 7 (1994-2001 / MK 3, E38) In order to remove the front air vents, those placed in the center of the console, which also integrate a fan inside them, it will be necessary to re
Center console disassembly instructions
BMW Serie 7 (1994-2001 / MK 3, E38) In order to disassemble the elements that make up the center console, including the bottle support support located at the very bottom, you must first

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos