Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 7
    4. : Disassembly of the front air vents

BMW Serie 7 - Video tutorial

Model: BMW Serie 7 MK 3, E38 - Years 1994-2001
Part: Dashboard
Operation: Disassembly of the front air vents

In order to remove the front air vents, those placed in the center of the console, which also integrate a fan inside them, it will be necessary to remove many elements of the console itself but also the instrument panel in order to access the seat of the fan power socket. ; therefore once the elements present in the console (radio and climate control controls) and the grille located in the center of the dashboard have been extracted, proceed with the disassembly of the instrument panel by unscrewing the relative fixing screws and also removing the shell that covers the upper part of the controls of the light switch; at this point it is possible to reach the socket and disconnect it to complete the disassembly of the ventilation outlets.


Posted on 8 September 2023 by ScegliAuto



Instructions for disassembling the air vents
BMW Serie 7 (1994-2001 / MK 3, E38) In order to disassemble the ventilation vents in the center of the console, it is suggested to start from the one positioned above, in the center of
Center console disassembly instructions
BMW Serie 7 (1994-2001 / MK 3, E38) In order to disassemble the elements that make up the center console, including the bottle support support located at the very bottom, you must first
Instructions for removing the climate control controls
BMW Serie 7 (2001-2008 / MK 4, E68, E65, E67, E66) To be able to disassemble the climate control panel it is necessary to remove some elements of the dashboard: at this stage it is suggested to pay pa

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos