Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cabin Air Vent Fan

Model: BMW Serie 7 MK 3, E38 - Years 1994-2001
Part: Blower motor

After completely removing the dashboard, you will finally have access to the cabin air vent fan motor. The following images will show you the final stages of the job. As the images show, first remove the plastic vents. Next, remove the plastic bars that control the opening and closing of the air intake vents that direct the flow of cold or hot air. As you can see, they are snap-fitted onto their respective pins. Now, disconnect the electrical connector and remove the screws to take off the protective cover. Finally, remove the mounting screws and take out the fan itself. Car model: BMW E38 740i Year: 2000
Required tools: Torx wrench 20/25, forked screwdriver for spring pins.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Front Air Vents
Removing Front Air Vents
BMW Serie 7 (1994-2001 / MK 3, E38) To remove the front air vents located at the center of the console, which also integrate a fan inside, you will need to disassemble several elements …
Removing the Center Burl Wood Trim
Removing the Center Burl Wood Trim
BMW Serie 7 (2001-2008 / E66, E67, E68, E65, MK 4) To remove the burl wood trim covering the center section of the dashboard, first remove the side air vent on the passenger side; beneath the vent, th…
Instructions for Removing Air Vents
Instructions for Removing Air Vents
BMW Serie 7 (1994-2001 / MK 3, E38) To remove the air vents in the center of the console, start with the one located above, in the center of the dashboard: this way, you can access the …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos