Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Center Burl Wood Trim

Model: BMW Serie 7 E66, E67, E68, E65, MK 4 - Years 2001-2008
Part: Dashboard

To remove the burl wood trim covering the center section of the dashboard, first remove the side air vent on the passenger side; beneath the vent, there is a fastening nut for the trim itself. Two additional clips are located in the center area, above the central air vents: to access them, remove the grille located directly above the central air vents, in front of the console display. Once these two clips are removed, you can detach the trim.

Updated on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 7 (1994-2001 / MK 3, E38) To disassemble the components of the center console, including the bottle holder at the bottom, first remove the central trim of the dashboard (in th…
BMW Serie 7 (2001-2008 / E66, E67, E68, E65, MK 4) To remove the rear speaker, first take off the door panel. Start by removing the two square plugs located below the wood trim covering the armrest ar…
BMW Serie 7 (2001-2008 / E66, E67, E68, E65, MK 4) Replacing the engine start button (next to the key slot) requires removing all components in the center console since the button and key module come …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos