Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 7
    4. : Disassembly of the navigator monitor console

BMW Serie 7 - Video tutorial

Model: BMW Serie 7 MK 3, E38 - Years 1994-2001
Part: Dashboard
Operation: Disassembly of the navigator monitor console

In order to disassemble the center console which includes the navigator monitor, it is necessary to start by removing the briar moldings in the center of the dashboard: just pull them outwards as they are fixed through pegs to pressure stops (for the one above the glove compartment first remove the dashboard strip fixed with plastic nuts). Once the moldings have been removed, it is possible to access the lateral fixing screws which, once unscrewed, allow to remove the covering frame and to unscrew the other fixing screws of the console; at this point it is possible to extract the console and disconnect the sockets.


Posted on 10 August 2023 by ScegliAuto



Center console disassembly instructions
BMW Serie 7 (1994-2001 / MK 3, E38) In order to disassemble the elements that make up the center console, including the bottle support support located at the very bottom, you must first
Disassembly of the front air vents
BMW Serie 7 (1994-2001 / MK 3, E38) In order to remove the front air vents, those placed in the center of the console, which also integrate a fan inside them, it will be necessary to re
Starter button replacement
BMW Serie 7 (2001-2008 / MK 4, E68, E65, E67, E66) The replacement of the engine start button (next to which there is also the key seat) requires the disassembly of all the elements present in the cen

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos